Kombi Wheel Deal
KOMBCOMP1106 - Located on the switch and bottom section of the handlebars.
KOMBCOMP1151 - The Stainless Steel Nozzle a popular nozzle for grass marking.
KOMBCOMP1105 - The Complete Nozzle Assembly delivers the paint onto the surface being marked. It can be lifted off the Kombi and used for free hand marking such as corner quadrants, penalty spots etc
FASTCOMP2037 - The Yellow Nozzle is mainly used for Tarmac and Hard surfaces for lines at 3 inches or wider.
The Standard Knib is a line forming device for marking on Natural Grass.
KOMBCOMP1005 - Heavy duty clear hose.
KOMBCOMP1020 - R Clip for wheel
KOMBCOMP1021 - Spanner for various caps on the machine
KOMBCOMP1022 - The operating switch (on - off)
KOMBCOMP1023 - Coiled power cable to the switch
KOMBCOMP1026 - Lid for the Kombi line marker.
KOMBCOMP1027 -Filter for the Kombi line marker.
KOMBCOMP1028 - Top section of the handlebars
KOMBCOMP1029 - Bottom section of the handlebars
KOMBCOMP1031 - Filter inside the tank
KOMBCOMP1032 - Plastic hinge that the bonnet clips too.
KI00COMP5046 - Non puncture replacement tyre and wheel for The Kombi.
KOMBCOMP1036 - Cap located underneath machine
KOMBCOMP1037 - A vented water cap which is found on back tank.
KOMBCOMP1039 - Replacement battery for the Kombi.
KOMBCOMP1041 - Directs the flow to either paint or water.
KI00COMP5058 - Allow the bonnet to open and close.
KOMBCOMP1042 - Replacement pump for The Kombi.
KOMBCOMP1043 - Push fit found in the pump and return tap.
KOMBCOMP1044 - Ball valve found at the very front of the Kombi just inside the bonnet.
KOMBCOMP1045 - The connector found at the very front of the machine.
KOMBCOMP1046 - Snap connector found at the end of the nozzle assembly.
KOMBCOMP1047 - Allows the blue hose to be connected securely.
KOMBCOMP1051 - The Blue Nozzle is the most popular nozzle for grass marking.
KOMBCOMP1052 - The Orange Nozzle mainly used on grass surfaces.
KOMBCOMP1057 - Socket for charging the machine.
UNIVCOMP9004 - Push fit elbow under paint/water tap
UNIVCOMP9005 - PVC Tube 8mm od x 5mm used under neath the bonnet.
UNIVCOMP9006 - Elbow fitting used on the nozzle assembly
UNIVCOMP9008 - Coiled hose used in the Nozzle Assembly.
UNIVCOMP9009 - Tightens the nozzle holder to the brass extension.
UNIVCOMP9013 - Keeps a firm grip on the machine
UNIVCOMP9014 - Extention piece from the pump
UNIVCOMP9038 - Connects to the handlebar top section.